|
|
Modern technological elements for tubular heat exchangers
Plánková, Tereza ; Babička Fialová, Dominika (referee) ; Jegla, Zdeněk (advisor)
The aim of this diploma thesis is to get acquainted with modern technological elements currently used in shell-and-tube heat exchanger in the shell-side and tube-side, thermal-hydraulic calculation of selected elements and comparison of thermal-hydraulic properties with classically used competing technological elements. The work deals mainly with EM baffle in the tube-side and tube inserts like the twisted tape type (and its modifications) and coiled wire in the tube-side. The theoretical part is focused on acquaintance with classical technological elements in shell-and-tube heat exchanger and with basic thermal-hydraulic calculations, practical part then on acquaintance with modern elements and thermal-hydraulic calculation of selected elements. These calculations are then compared with the results of the thermo-hydraulic calculation of similar elements.
|
|
|
Air conditioning in the library
Pospíšilová, Lucie ; Uher, Pavel (referee) ; Blasinski, Petr (advisor)
Dissertation offers a plan for air – conditioning equipment of library building in Brno and it involves air filter experimental measurement. The proposal is divided into three parts. The first part explains air filter theory with detailed description of atmospheric air filters for separation of particles for general ventilation - filter parameter determination. Theory part ends specifically with pocket air filters and their construction. The second part focuses on experimental pocket air filter measurement execution, which calculates with variable filter cartridges and pocket count. Measurement also evaluates pressure drop and their efficiency. The last part of the dissertation looks at air – conditioning equipment design for specified building, concretely library building. The project solves fresh air traffic into interior of selected library rooms and it counts with thermal heat gain in summer season, heat loss in winter season and air humidity modification.
|
|
|
Influenc of Instability to Critical Heat Flux
Khůlová, Jitka ; Vojáčková, Jitka (referee) ; Suk, Ladislav (advisor)
This bachelor's thesis is elaborating about two-phase flow in the heated channel. It describes flow instabilities and their influence to critical heat flux. The calculation methods of two-phase flow are introduced. The homogeneous equilibrium method is selected for the practical part. The results are evaluated and possible solution to prevent flow instabilities is suggested.
|
|
|
Sludge Pumping on WWTP
Fadrný, Tomáš ; Medek, Jaroslav (referee) ; Boráň, Jaroslav (advisor)
This diploma thesis deals with the best solution design for a sludge fitting, especially focusing on the right choice of pumps for the waste water treatment plant in Prostějov. The pumps were selected for a circulation pipeline, which heats up the sludge. Several measurements were carried out in order to determine the statistical evaluation of the properties of the pumped medium. The figures gained were used to calculate pressure losses.The diploma thesis is divided into two parts. The first part provides a theoretical analysis of the problem and the second part presents the results and subsequently the reasoning for the new selection of pumps in order to change the WWTP technology from the mesophilic to the thermophilic sludge digestion. The test records describing the testing of the individual samples of the pumped sludge are attached.
|
|
|
Pressure losses in heating systems
Švanda, Martin ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with pressure losses in heating systems. The diploma thesis is divided into three sections. The first part is theoretical and deals with the occurrence of pressure losses. It discusses the properties of the fluid that affect pressure losses. It also deals with hydrodynamic phenomena, flow distribution, pressure loss distribution and its calculations. The aim of the second part, which is practical, was to create a heating project for a selected object. The object is a two-floor kindergarten building located in Velké Němčice. For this project, two heating variants were created. For the first variant, radiators and heating benches were designed and for the second variant, underfloor heating was installed in the building. The goal was to use a source which will gain heat mainly from renewable sources, so the air / water heat pump was chosen as the source of heat production. The project ends with a technical report. The third part of the thesis is dedicated to an experiment which purpose was to find out how the pressure losses of the connecting pieces are reacting to the change with the change of the heating water conditions (flow, temperature). Alongside, two pipes were created which differed in the type of connecting pieces so it allowed to compare how their pressure losses differ. Both pipes were connected by radial pressing, but the fittings differed in the quality of the brass, and therefore in the construction. Also, part of the experimental section of the diploma thesis is a description of the course of radial pressing of fittings from the Herz company.
|
|
| |
|
|
Properties of ceramics foam filters needed for numerical simulation software
Boček, Vítězslav ; Láník, Boris (referee) ; Záděra, Antonín (advisor)
Final thesis, elaborated within the master study field of Foundry technology, deals with determination of some parameters of ceramic foam filters that are necessary for using numerical simulation during foundry practice. Thesis foccuses on defining methodology, manufacturing messuring device and measuring pressure drop on several type sof ceramic foam filters in dependence on flow rate of measuring medium. Measuring medium selected is water, mening this thesis deals also with water simulation in foundry technology.
|
|
|
Hydrodynamic analysis of basic equipment in units for the thermal processing of wastes
Říha, Kamil ; Kilkovský, Bohuslav (referee) ; Pařízek, Tomáš (advisor)
Thermal processing of wastes is a metod, when during combustion occur reduction of wastes till 10% previous volume. The main advantage of this method is possibility to heat utilization for heat and electric production. Through thermic process develops range of pollutants (NOx, CO, SO2, HCl, HF, PCDD/F) that had to be remove from off-gas or reduced to enviromental values in agreement with laws in force [16]. For this purpose are combustion units equip with range of devices for removing this pollutans. The main task of this diploma thesis is selectoin of ctirical device in term of pressure drops. The value of pressure drop stands significant part in proposition of efficiecy off-gas fan. In increase or decrease total pressure drop consumption of electrical energy of off-gas fan is rising or going down. Change of consumption in total classification is projecting in energy utilization rate of waste where is determinate if it stands of energy utilizatoin or just incineration. In first part of diploma thesis are described in detail availability methods of off-gas cleaning where is described their principle, advanteges, disadvatages and comparison of effectivity. In second part of diploma thesis is made example model about influnce technology on value of total pressure drop. There were chosen two technologies for removing dioxins (technology of catalytic filtration REMEDIA and DeNox/DeDiox). For both technologies were made detailed analysis of pressure drops single components of these technologies. Attainment results were compared and rated with one another. For analysis these two methods were designed mathematical process in software Maple 9.5.
|
|
|
Analysis of Flow Distribution in Systems with Dense Tube Bundles
Babička Fialová, Dominika ; Dohnal, Miloslav (referee) ; Turek, Vojtěch (advisor)
Considering heat transfer equipment with dense tube bundles, it is essential to ensure as uniform a fluid distribution into the tubes as possible in order to prevent various operating problems. This bachelor’s thesis therefore focuses on tube-side flow analysis in such equipment. CFD simulations were carried out using a diverse set of flow systems with outflow into a constant-pressure environment. The respective tube bundle geometries differed in densities and sizes, arrangements of the tubes, and tube diameters. Air was used as the working fluid in the majority of the cases, however, some of the simulations were also carried out with water. Data obtained from evaluations in the fluid flow modelling software ANSYS Fluent were further analysed and the influence of the mentioned differentiating parameters on flow distribution non-uniformity and pressure drop was investigated. According to the regression model, the dependence of flow distribution non-uniformity on density and size of the bundle and on mass flow rate per unit outflow area cannot be rejected with the standard significance level. As for pressure drop, the only parameter that was not rejected was mass flow rate per unit outflow area.
|
|
|
Design of a space heating system with a heat pump air-water and solid fuel source for heating the family house
Španihelová, Kateřina ; Elcner, Jakub (referee) ; Katolický, Jaroslav (advisor)
The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.
|
guest ::
